What is a Radiology Information System (RIS)?

A Radiology Information System (RIS) is a networked software system for managing medical imagery and associated data. ThaiRIS is especially useful for tracking radiology imaging orders and billing information, and is often used in conjunction with Picture Archiving and Communication Systems (PACS) and VNAs to manage record-keeping, billing, and workflow.

Patient Management

Scheduling

Result Entry

Reporting & Billing

Advanced Chip Design- Practical Examples In Verilog [UPDATED]

always_comb begin next = state; case (state) IDLE: if (cpu_req) next = TAG_CHECK; TAG_CHECK: if (hit) next = HIT_FILL; else next = MISS_REFILL; ... endcase end // Implement LRU replacement, write-back vs write-through endmodule | Tool | Purpose | |------|---------| | Verilator | Fast simulation + linting | | Yosys | Synthesis to generic netlist | | OpenSTA | Static timing analysis | | GTKWave | Waveform viewing | | SymbiYosys | Formal verification (SVA) |

Separate pipeline registers, hazard detection (data forwarding), branch prediction. 3. Memory Controllers & Arbitration Example: AHB-Lite Slave (Burst Write) module ahb_slave ( input HCLK, HRESETn, input HTRANS, HWRITE, HREADY, input [31:0] HADDR, HWDATA, output reg HREADYOUT, HRESP, output reg [31:0] HRDATA ); reg [31:0] memory [0:1023]; Advanced Chip Design- Practical Examples In Verilog

always @(posedge HCLK or negedge HRESETn) begin if (!HRESETn) HREADYOUT <= 1'b1; else begin if (HREADY && HTRANS == NONSEQ) begin if (HWRITE) memory[HADDR[11:2]] <= HWDATA; else HRDATA <= memory[HADDR[11:2]]; HREADYOUT <= 1'b1; end else HREADYOUT <= 1'b1; // wait-state insertion possible end end endmodule always_comb begin next = state; case (state) IDLE:

// Gray code sync across domains reg [3:0] wptr_sync_r, rptr_sync_r; always @(posedge rclk) wptr_sync_r <= wgray; // + 2nd flop input [31:0] HADDR

// Stage 2: Decode & Register Read (combinational) wire [4:0] rs1 = IF_ID_instr[19:15]; wire [4:0] rs2 = IF_ID_instr[24:20]; wire [31:0] reg_data1 = regfile[rs1]; wire [31:0] reg_data2 = regfile[rs2];

Gray code pointers, full/empty detection, metastability hardening. 5. Low-Power Design Techniques Clock Gating (Integrated with synthesis) module clock_gated_reg ( input clk, en, d, output reg q ); wire gated_clk; assign gated_clk = clk & en; // NOT for FPGA (glitchy) // Better: use latch-based AND gate reg en_latch; always @(clk or en) if (!clk) en_latch = en; assign gated_clk = clk & en_latch;