Before attempting any third-party tools, try these legitimate routes: Contact the Machine Builder:
or an authorized distributor. They typically require proof of ownership and the PLC’s serial number. While they may not provide the password directly, they can often provide official guidance on resets. Industrial Monitor Direct 2. Memory Reset (Full Program Loss)
Power the unit up for 3–5 seconds (the Error LED may flash).
Power down, remove the jumper, and restart. The PLC should now be in a default, unprotected state. Industrial Monitor Direct 3. Password "Bypass" in Software Sometimes passwords are set only on the project file (offline) rather than the PLC hardware itself. Check if you can open the project in WinProLadder using "Read from PLC" rather than opening an existing Fatek Plc Password Crack
If you do not need the existing program and just want to reuse the hardware, you can clear the memory. Warning: This permanently deletes the program and all data. CLR Jumper Method:
Do you have the original project file or are you trying to pull the program from the hardware?
On many models (like the FBs series), there are pins labeled on the board. Power down the PLC. Place a jumper on the CLR pins. Industrial Monitor Direct 2
If your PLC screen shows "5%" during a password request, it often indicates a specific security level that cannot be bypassed by standard software tricks.
These tools are often distributed through unverified forums and can contain malware. Hardware Limitation:
The Original Equipment Manufacturer (OEM) or system integrator who programmed the machine usually has the original password or an unprotected backup. Contact Fatek Support: Reach out to The PLC should now be in a default, unprotected state
file. If the protection is only file-level, you might be able to pull the logic directly from the controller if the hardware itself isn't locked. 4. Risks of Third-Party "Crackers" You may find community-made tools or services (e.g., PLCUnlockBD ) that claim to bypass FBs Series V5.83 or ID passwords. Security Risk:
Authentic "cracking" of PLC passwords often involves significant security risks or potential data loss. If you are locked out of a Fatek PLC, the most reliable and safe methods involve working through official channels or authorized procedures to regain access. 1. Official Recovery Procedures