Yl-105 Datasheet -

It’s often paired with the (laser receiver module) to create a complete optical link. Key Specifications (from the YL-105 Datasheet) | Parameter | Value | |-----------|-------| | Operating Voltage | 5V DC | | Current Consumption | ~30mA (max 40mA) | | Laser Wavelength | 650nm (red) | | Output Power | <5mW (Class IIIa laser) | | Beam Divergence | Adjustable via potentiometer | | Digital Interface | 3-pin (VCC, GND, SIG) | | Dimensions | 18mm x 15mm x 8mm | | Operating Temperature | -10°C to +50°C | ⚠️ Safety Note: Even though it’s low-power (<5mW), avoid pointing the laser into eyes. Treat it like any Class IIIa laser device. Pinout Diagram Most YL-105 modules use a standard 3-pin header (2.54mm pitch):

void loop() digitalWrite(laserPin, HIGH); // Laser ON delay(1000); digitalWrite(laserPin, LOW); // Laser OFF delay(1000); yl-105 datasheet

In this post, we’ll break down everything you need to know: pinout, specifications, typical applications, and how to safely interface it with microcontrollers. The YL-105 is a laser diode module that emits a visible red beam (typically 650nm wavelength). Unlike a simple laser pointer, this module is designed for electronic control — you can turn it on/off digitally or modulate the beam at high speeds (useful for data transmission). It’s often paired with the (laser receiver module)

Share your experience in the comments below. Looking for the YL-106 receiver datasheet? Let us know, and we’ll cover that next. Pinout Diagram Most YL-105 modules use a standard

If you’re diving into Arduino or robotics projects involving laser communication, tripwires, or target detection, you’ve likely come across the YL-105 — a compact, 5V laser transmitter module. While the module is popular among hobbyists, finding a clear, consolidated datasheet can be tricky.

| Pin | Label | Description | |-----|-------|-------------| | 1 | VCC | 5V DC input | | 2 | GND | Ground | | 3 | SIG | Signal input (active HIGH: laser ON) |